PH903-2 SPIRALS OF HIGH TENSILE STEEL WIRE,1 BRAID OF G.I STEEL WIRE
Construction
|
Inner tube |
Polytetrafluoroethylene (PTFE) |
|||
|
Reinforcement |
2 Spirals of high-tensile steel wire ,1 braid of G.I steel wire |
|||
|
Cover |
|
|||
|
Application |
Automotive: Hot Melt Adhesives / Hot Glue Dispensing, Injection Molding, Chemical Transfer / Paint Transfer, Robotic Systems, Compressed Gas |
|||
Note : Production related variations of Burst Pressure of upto 10% possible. Indicated working pressure refers to hose only. Depending on the end connectors used, the permited working pressure of hose assembly may be less
 ID |  OD |  WP |  BP |  BR/r |  W |
|||||
|---|---|---|---|---|---|---|---|---|---|---|
| Item Code | DN | inch | mm | mm | psi | bar | psi | bar | mm | kg/m |
| PH903-04 | 6 | 1/4 | 6.2 | 11.2 | 7250 | 500 | 29000 | 2000 | 60 | 270 |
| PH903-05 | 8 | 5/16 | 8.0 | 13.4 | 6880 | 475 | 27500 | 1900 | 85 | 345 |
| PH903-06 | 10 | 3/8 | 10.0 | 15.7 | 6525 | 450 | 26100 | 1800 | 110 | 500 |
| PH903-08 | 12 | 1/2 | 12.2 | 18.8 | 6520 | 450 | 26100 | 1800 | 150 | 600 |
| PH903-10 | 16 | 5/8 | 15.1 | 21.6 | 5800 | 400 | 23200 | 1600 | 175 | 700 |
| PH903-12 | 20 | 3/4 | 20.2 | 27.5 | 4350 | 300 | 17400 | 1200 | 200 | 1055 |
| PH903-16 | 25 | 1 | 24.2 | 31.4 | 3980 | 275 | 15950 | 1100 | 240 | 1205 |
| PH903-20 | 32 | 1 1/4 | 32.0 | 39.0 | 3620 | 250 | 14500 | 1000 | 280 | 1600 |
|
|
|
|
Temperature Range |
Continuous: -70°C to 200°C |
Important Information !
PH903 series hoses are intended for being used as basic hoses for heating hose systems. They do not have an outer cover and the wires are not protected against corrosion. It is not allowed to use these hoses in a “normal” hose assembly without taking the right steps to prevent the corrosion of the wires because there exists the risk of injury as well as the possibility of the failure of the hose assembly. PH903 series hoses are available as a special execution with a plastic outer cover. For further information, Please contact manufacturer
PH903 series hoses are intended for being used as basic hoses for heating hose systems. They do not have an outer cover and the wires are not protected against corrosion. It is not allowed to use these hoses in a “normal” hose assembly without taking the right steps to prevent the corrosion of the wires because there exists the risk of injury as well as the possibility of the failure of the hose assembly. PH903 series hoses are available as a special execution with a plastic outer cover. For further information, Please contact manufacturer
