PH250 - R3
Applicable Standard : SAE J517 – 100R3
Construction
|
Inner tube |
Black colour, synthetic rubber resistant to oil and water |
|||
|
Reinforcement |
Double fiber braids |
|||
|
Cover |
Black colour, synthetic rubber resistant to abrasion and weather, oil & ozone. Available in wrap and smooth finish* |
|||
|
Application |
Low pressure and impulse hydraulic Lines 20 to 105 bar for use with petroleum, synthetic or water based fluids in hydraulic systems . Suitable for Agriculture, Construction & material handling equipment and machineries/systems |
|||
| Cover Options |
|---|
|
PH250 : MSHA
|
Note : 1-1/2″ not covered under SAE 100R3
 ID |  OD |  WP |  BP |  BR/r |  W |
||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Item Code | Dash Size | DN | inch | mm | inch | mm | psi | bar | psi | bar | inch | mm | kg/m |
| PH250-03 | -03 | 05 | 3/16 | 4.9 | 0.50 | 12.7 | 1525 | 105 | 6090 | 420 | 3.0 | 75 | 0.171 |
| PH250-04 | -04 | 06 | 1/4 | 6.5 | 0.56 | 14.3 | 1305 | 90 | 5075 | 350 | 3.0 | 75 | 0.186 |
| PH250-05 | -05 | 08 | 5/16 | 8.0 | 0.69 | 17.5 | 1235 | 85 | 4930 | 340 | 3.9 | 100 | 0.272 |
| PH250-06 | -06 | 10 | 3/8 | 9.6 | 0.75 | 19.0 | 1160 | 80 | 4570 | 315 | 3.9 | 100 | 0.326 |
| PH250-08 | -08 | 12 | 1/2 | 12.9 | 0.94 | 23.8 | 1015 | 70 | 4060 | 280 | 4.9 | 125 | 0.456 |
| PH250-10 | -10 | 16 | 5/8 | 16.1 | 1.06 | 27.0 | 945 | 65 | 3560 | 245 | 5.5 | 140 | 0.677 |
| PH250-12 | -12 | 19 | 3/4 | 19.2 | 1.25 | 31.8 | 800 | 55 | 3045 | 210 | 5.9 | 150 | 0.734 |
| PH250-16 | -16 | 25 | 1 | 25.6 | 1.50 | 38.1 | 580 | 40 | 2320 | 160 | 8.1 | 205 | 0.921 |
| PH250-20 | -20 | 31 | 1.1/4 | 32.1 | 1.75 | 44.5 | 435 | 30 | 1525 | 105 | 9.8 | 250 | 0.734 |
| PH250-24 | -24 | 38 | 1.1/2 | 38.5 | 2.00 | 50.8 | 290 | 20 | 1015 | 70 | 15.7 | 400 | 1.394 |
|
|
|
|
Temperature Range |
Continuous: -40°C to 100°C |
|
Intermittent |
+120°C |
|
Impulse Cycles |
200,000 cycles |
*Smooth cover available only upto size 1″
